CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSuSyncHighEffort

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSuSyncHighEffort

p2mpSuSyncHighEffort

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuSyncHighEffort

OID (numeric): 1.3.6.1.4.1.9.9.181.2.6.1.15

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object indicates how many times the channels were scanned due to sync loss (after first sync at Link Admin Up time).

What is p2mpSuSyncHighEffort?

A read-only Counter32 counting how many times the subscriber unit had to scan through the channels to reacquire sync after losing it, following the initial sync at Link Admin Up. Because a full channel scan takes noticeably longer than a quick medium-effort recovery, a high value here means the unit is regularly enduring longer outages while it searches for the signal rather than reacquiring almost instantly. For example, a unit with a rising p2mpSuSyncHighEffort count would likely be experiencing noticeably longer service interruptions each time it drops sync compared to a unit whose recoveries stay in the medium-effort category.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.6.1.15
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuSyncHighEffort

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.6.1.15.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuSyncHighEffort.1

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuSyncHighEffort OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6p2mpSuCumulativeLinkMetricsTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6.1p2mpSuCumulativeLinkMetricsEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6.1.15p2mpSuSyncHighEffortCISCO-WIRELESS-P2MP-LINK-METRICS-MIB