CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSuPctSevErroredSeconds

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSuPctSevErroredSeconds

p2mpSuPctSevErroredSeconds

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctSevErroredSeconds

OID (numeric): 1.3.6.1.4.1.9.9.181.2.6.1.7

Node type: OBJECT-TYPE

Type: CwrPercentageValue

Access: read-only

Description: This object represents the ratio of cumulative Codeword Severely Errored Seconds (SES) to Link Admin Up seconds, expressed as a percentage.

What is p2mpSuPctSevErroredSeconds?

A read-only CwrPercentageValue, in units of 0.00001 percent, giving the ratio of cumulative Codeword Severely Errored Seconds to Link Admin Up seconds, expressed as a percentage. This normalized SES rate is often the specific figure quoted against an SLA's severe-error-second commitment, since raw counts alone do not account for how long the link has actually been in service. For example, an SLA that guarantees fewer than 0.01 percent severely errored seconds could be checked directly against p2mpSuPctSevErroredSeconds without needing to separately track total uptime.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.6.1.7
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctSevErroredSeconds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.6.1.7.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctSevErroredSeconds.1

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctSevErroredSeconds OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6p2mpSuCumulativeLinkMetricsTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6.1p2mpSuCumulativeLinkMetricsEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6.1.7p2mpSuPctSevErroredSecondsCISCO-WIRELESS-P2MP-LINK-METRICS-MIB