CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSuPctErroredSeconds

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSuPctErroredSeconds

p2mpSuPctErroredSeconds

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctErroredSeconds

OID (numeric): 1.3.6.1.4.1.9.9.181.2.6.1.6

Node type: OBJECT-TYPE

Type: CwrPercentageValue

Access: read-only

Description: This object represents the ratio of cumulative Codeword Errored Seconds (ES) to Link Admin Up seconds, expressed as a percentage.

What is p2mpSuPctErroredSeconds?

A read-only CwrPercentageValue, in units of 0.00001 percent, giving the ratio of cumulative Codeword Errored Seconds to Link Admin Up seconds, expressed as a percentage. It is the lifetime error-second rate, giving an admin one normalized figure comparable across links of different total uptime rather than raw error-second counts that would naturally differ by link age. For example, comparing p2mpSuPctErroredSeconds across several subscriber units on the same head end would let an admin identify which specific link is proportionally the worst performer, regardless of how long each has been up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.6.1.6
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctErroredSeconds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.6.1.6.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctErroredSeconds.1

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuPctErroredSeconds OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6p2mpSuCumulativeLinkMetricsTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6.1p2mpSuCumulativeLinkMetricsEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.6.1.6p2mpSuPctErroredSecondsCISCO-WIRELESS-P2MP-LINK-METRICS-MIB