CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSuLinkESThresh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSuLinkESThresh

p2mpSuLinkESThresh

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkESThresh

OID (numeric): 1.3.6.1.4.1.9.9.181.2.1.1.1

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: When the number of Codeword Errors detected in a single Operational second is greater than this value, that second is counted as an Errored Second.

What is p2mpSuLinkESThresh?

A read-write Unsigned32 setting the per-second codeword-error threshold above which that second is classified as an Errored Second (ES) for this subscriber unit's link. This threshold defines the boundary between a second with a few tolerable errors and one bad enough to count against the link's error-second statistics that admins use to judge overall link health. For example, lowering p2mpSuLinkESThresh makes the link's Errored Seconds counter more sensitive, flagging seconds with even a modest number of codeword errors that a higher threshold would have ignored.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.1
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkESThresh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.1.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkESThresh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.181.2.1.1.1.1 i <value>

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkESThresh OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.1p2mpSuLinkMetricsThreshTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.1.1p2mpSuLinkMetricsThreshEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.1.1.1p2mpSuLinkESThreshCISCO-WIRELESS-P2MP-LINK-METRICS-MIB