All MIBs › CISCO-WIRELESS-P2MP-LINK-METRICS-MIB › p2mpSuLinkDSThresh
p2mpSuLinkDSThresh
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkDSThresh
OID (numeric): 1.3.6.1.4.1.9.9.181.2.1.1.2
Node type: OBJECT-TYPE
Type: CwrPercentageValue
Access: read-write
Description: When the percentage of codeword errors detected to the total codewords received in one second is equal to or greater than this value, and less than p2mpLinkSESThresh, the second is counted as a Codeword Degraded Second.
What is p2mpSuLinkDSThresh?
A read-write CwrPercentageValue, in units of 0.00001 percent, setting the codeword error-rate percentage at or above which, but still below the severely-errored threshold, a second is classified as a Degraded Second (DS). This defines the moderately-bad band of link quality between normal operation and a severely errored second, letting the device distinguish minor degradation from serious failure at the statistics level. For example, setting p2mpSuLinkDSThresh to a low percentage would make the subscriber unit flag even a slight uptick in per-second error rate as a Degraded Second, giving early warning before conditions worsen further.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkDSThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkDSThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.181.2.1.1.2.1 s <value>
Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkDSThresh OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2 | p2mpSuLinkMetricsGroup | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1 | p2mpSuLinkMetricsThreshTable | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1.1 | p2mpSuLinkMetricsThreshEntry | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1.1.2 | p2mpSuLinkDSThresh | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |