All MIBs › CISCO-WIRELESS-P2MP-LINK-METRICS-MIB › p2mpSuLinkCSESThresh
p2mpSuLinkCSESThresh
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkCSESThresh
OID (numeric): 1.3.6.1.4.1.9.9.181.2.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: When the number of severely errored codewords detected consecutively in one second equals or exceeds this value, the second is counted as a Consecutively Severely Errored Second.
What is p2mpSuLinkCSESThresh?
A read-write Unsigned32 setting the number of consecutively occurring severely errored codewords within one second required before that second is classified as a Consecutively Severely Errored Second (CSES). Because a burst of back-to-back bad codewords is more damaging than the same number scattered throughout a second, this threshold specifically captures burst-type severe impairment distinct from the plain SES metric. For example, an engineer investigating brief but intense interference bursts, rather than steady error rates, would specifically watch the CSES counter driven by this p2mpSuLinkCSESThresh setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.4 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkCSESThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.4.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkCSESThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.181.2.1.1.4.1 i <value>
Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLinkCSESThresh OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2 | p2mpSuLinkMetricsGroup | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1 | p2mpSuLinkMetricsThreshTable | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1.1 | p2mpSuLinkMetricsThreshEntry | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1.1.4 | p2mpSuLinkCSESThresh | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |