All MIBs › CISCO-WIRELESS-P2MP-LINK-METRICS-MIB › p2mpSuLink1HrDCSAlarmThresh
p2mpSuLink1HrDCSAlarmThresh
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrDCSAlarmThresh
OID (numeric): 1.3.6.1.4.1.9.9.181.2.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the one hour Degraded Codeword Seconds threshold. When the number of Degraded Codeword Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuDegradedSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.
What is p2mpSuLink1HrDCSAlarmThresh?
A read-write Unsigned32 setting the number of Degraded Codeword Seconds permitted within a one-hour operational window before the p2mpSuDegradedSecAlarmTrap is generated. Since degraded seconds represent the mildest tier of link impairment, this threshold typically allows a higher count before alarming compared to the SES and CSES alarm thresholds, catching only sustained or worsening minor degradation. For example, an admin might tolerate a moderate p2mpSuLink1HrDCSAlarmThresh during a known period of seasonal rain fade, only escalating on the stricter SES-based alarms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.8 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrDCSAlarmThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.8.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrDCSAlarmThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.181.2.1.1.8.1 i <value>
Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrDCSAlarmThresh OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2 | p2mpSuLinkMetricsGroup | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1 | p2mpSuLinkMetricsThreshTable | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1.1 | p2mpSuLinkMetricsThreshEntry | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.2.1.1.8 | p2mpSuLink1HrDCSAlarmThresh | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |