CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSuLink1HrCSESAlarmThresh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSuLink1HrCSESAlarmThresh

p2mpSuLink1HrCSESAlarmThresh

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrCSESAlarmThresh

OID (numeric): 1.3.6.1.4.1.9.9.181.2.1.1.7

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the one hour Codeword Consecutively Severely Errored Seconds threshold. When the number of Codeword Severely Errored Seconds in a 1 Operational Hour period exceeds this value, the p2mpSuConsecSevErrSecAlarmTrap trap will be generated. Time measurement starts after the first operational second.

What is p2mpSuLink1HrCSESAlarmThresh?

A read-write Unsigned32 setting the number of Consecutively Severely Errored Seconds allowed within a one-hour window before the p2mpSuConsecSevErrSecAlarmTrap is generated. Because CSES specifically flags burst-type severe errors, this hourly threshold gives an early automatic alert focused on sustained outage-like conditions rather than scattered single-second glitches. For example, an admin monitoring a link prone to brief total signal blackouts would rely on p2mpSuLink1HrCSESAlarmThresh to catch repeated consecutive-error bursts even if the overall error-second count for the hour looks otherwise unremarkable.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.7
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrCSESAlarmThresh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.1.1.7.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrCSESAlarmThresh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.181.2.1.1.7.1 i <value>

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSuLink1HrCSESAlarmThresh OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.1p2mpSuLinkMetricsThreshTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.1.1p2mpSuLinkMetricsThreshEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.1.1.7p2mpSuLink1HrCSESAlarmThreshCISCO-WIRELESS-P2MP-LINK-METRICS-MIB