CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSu1MinValidDataPkt

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSu1MinValidDataPkt

p2mpSu1MinValidDataPkt

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1MinValidDataPkt

OID (numeric): 1.3.6.1.4.1.9.9.181.2.3.1.5

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This variable indicates the number of data packets received without any bit errors from the last Link Admin Up time until the current operational second.

What is p2mpSu1MinValidDataPkt?

A read-only Counter32 counting data packets received completely free of bit errors since the link was last administratively brought up, tracked at 1-minute granularity. It gives the same clean-packet delivery measure as the 1-second table but at a resolution more practical for continuous long-term polling without excessive SNMP traffic. For example, an NMS polling once a minute would use p2mpSu1MinValidDataPkt rather than the 1-second table to track clean-packet delivery trends without needing to poll every single second.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.3.1.5
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1MinValidDataPkt

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.3.1.5.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1MinValidDataPkt.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> p2mpSu1MinValidDataPkt.1

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1MinValidDataPkt OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.3p2mpSu1MinMetricsTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.3.1p2mpSu1MinMetricsEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.3.1.5p2mpSu1MinValidDataPktCISCO-WIRELESS-P2MP-LINK-METRICS-MIB