CISCO-WIRELESS-P2MP-LINK-METRICS-MIB :: p2mpSu1HrConsecSvErrSeconds

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-P2MP-LINK-METRICS-MIBp2mpSu1HrConsecSvErrSeconds

p2mpSu1HrConsecSvErrSeconds

Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB

OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1HrConsecSvErrSeconds

OID (numeric): 1.3.6.1.4.1.9.9.181.2.4.1.9

Node type: OBJECT-TYPE

Type: CwrCwConsecutiveSevErrSecond

Access: read-only

Description: This object represents the cumulative Codeword Consecutive Severely Errored Seconds (CSES) detected from the last Link Admin Up time until the current operational hour

What is p2mpSu1HrConsecSvErrSeconds?

A read-only CwrCwConsecutiveSevErrSecond value giving the cumulative count of Codeword Consecutive Severely Errored Seconds detected since the link was last administratively brought up, current as of this operational hour. This hourly rollup is compared against p2mpSuLink1HrCSESAlarmThresh to decide whether the consecutive-severe-error alarm trap should fire for the hour. For example, an hour with a high p2mpSu1HrConsecSvErrSeconds value but few isolated SES events would indicate the link suffered from a small number of extended outage-like bursts rather than scattered brief errors.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.4.1.9
snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1HrConsecSvErrSeconds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.2.4.1.9.1
snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1HrConsecSvErrSeconds.1

Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpSu1HrConsecSvErrSeconds OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.181ciscoWirelessLinkMetricsMIBCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2p2mpSuLinkMetricsGroupCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.4p2mpSu1HrMetricsTableCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.4.1p2mpSu1HrMetricsEntryCISCO-WIRELESS-P2MP-LINK-METRICS-MIB
1.3.6.1.4.1.9.9.181.2.4.1.9p2mpSu1HrConsecSvErrSecondsCISCO-WIRELESS-P2MP-LINK-METRICS-MIB