All MIBs › CISCO-WIRELESS-P2MP-LINK-METRICS-MIB › p2mpHe1HrPctErrCWThresh
p2mpHe1HrPctErrCWThresh
Module: CISCO-WIRELESS-P2MP-LINK-METRICS-MIB
OID (symbolic): CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpHe1HrPctErrCWThresh
OID (numeric): 1.3.6.1.4.1.9.9.181.3.1.1.2
Node type: OBJECT-TYPE
Type: CwrPercentageValue
Access: read-write
Description: This object represents the threshold for the acceptable ratio of errored codewords to the total codewords transmitted in an operational hour.
For an Upstream Channel: When the percentage of errored codewords to total codewords transmitted on a upstream channel crosses this threshold, the p2mpHeChPctErrCWThreshTrap is sent out (provided the number of total codewords transmitted on the upstream channel in an operational hour, exceeds the value represented by p2mpHe1HrMinTotalCWThresh).
For a Subscriber Unit (SU): When the percentage of errored codewords to total codewords transmitted by a SU crosses this threshold, the SU is added to a list of SU's that have also crossed this threshold (provided the number of total codewords transmitted by the SU exceed the value represented by p2mpHe1HrMinTotalCWThresh). The head end sends out the p2mpHeMacPctErrCWThreshTrap to indicate that an SU has been added to the 'bad SU list'.
What is p2mpHe1HrPctErrCWThresh?
A read-write CwrPercentageValue, in units of 0.00001 percent, setting the acceptable ratio of errored to total codewords transmitted in an operational hour on the head end's upstream channel. Crossing this percentage, once the minimum traffic volume in p2mpHe1HrMinTotalCWThresh has been met, causes the head end to send the p2mpHeChPctErrCWThreshTrap, giving an automated alert on upstream channel quality. For example, a head-end administrator tuning p2mpHe1HrPctErrCWThresh tighter would get earlier automated warning of upstream channel degradation, at the risk of more frequent trap notifications during normal noise fluctuations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.181.3.1.1.2 snmpwalk -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpHe1HrPctErrCWThresh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.181.3.1.1.2.1 snmpget -v2c -c public <target> CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpHe1HrPctErrCWThresh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.181.3.1.1.2.1 s <value>
Start monitoring Cisco Wireless Point-to-MultiPoint radio equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-P2MP-LINK-METRICS-MIB::p2mpHe1HrPctErrCWThresh OID value, configure state conditions and alerts, and monitor any Cisco Wireless Point-to-MultiPoint radio equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.181 | ciscoWirelessLinkMetricsMIB | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.3 | p2mpHeLinkMetricsGroup | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.3.1 | p2mpHeLinkMetricsThreshTable | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.3.1.1 | p2mpHeLinkMetricsThreshEntry | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |
| 1.3.6.1.4.1.9.9.181.3.1.1.2 | p2mpHe1HrPctErrCWThresh | CISCO-WIRELESS-P2MP-LINK-METRICS-MIB |