All MIBs › CISCO-WIRELESS-EXP-MIB › cwrLedMode
cwrLedMode
Module: CISCO-WIRELESS-EXP-MIB
OID (symbolic): CISCO-WIRELESS-EXP-MIB::cwrLedMode
OID (numeric): 1.3.6.1.4.1.9.10.52.1.3.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This objects specifies the desired mode of LED updates.
automatic(1) and latched(2) are settings used by the software to determine how the LED should be updated.
The others are for diagnostic purposes. The LED will be turned on or off as specified by the other (3-8) settings.
The modes mean the following: automatic(1): The system updates the LED according to the default settings for that entity. latched(2): Once the LED is turned on, user has to turn it off. This applies only to alarm LEDs. forceOff(3): Force the LED off. forceSolidGreen(4): Force the LED to be solid green in on state. forceSolidYellow(5):Force the LED to be solid Yellow in on state forceBlinkGreen(6): Force the LED to blink in Green. forceBlinkYellow(7):Force the LED to blink in Yellow. forceBlinkBoth(8): Force the LED to blink Yellow and Green alternatively.
What is cwrLedMode?
This read-write INTEGER sets how a given LED is driven: automatic and latched let the software control it normally, while the remaining forced-color settings turn it on or off in a specific state for diagnostic purposes. It gives a technician a way to manually light or extinguish a specific LED to verify the hardware itself (not just the software logic) is working. For example, setting cwrLedMode to forceSolidGreen on a suspect indicator confirms whether the LED and its driver circuit still function, independent of the automatic status logic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.3.1.1.5 snmpwalk -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrLedMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.3.1.1.5.1 snmpget -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrLedMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.52.1.3.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwrLedMode.1
Start monitoring Cisco point-to-point wireless radio bridge (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-EXP-MIB::cwrLedMode OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless radio bridge (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.52 | ciscoWirelessExpMIB | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1 | cwrRadioExpMibObjects | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.3 | cwrRadioLedGroup | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.3.1 | cwrLedTable | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.3.1.1 | cwrLedEntry | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.3.1.1.5 | cwrLedMode | CISCO-WIRELESS-EXP-MIB |