All MIBs › CISCO-WIRELESS-EXP-MIB › cwrImageOp
cwrImageOp
Module: CISCO-WIRELESS-EXP-MIB
OID (symbolic): CISCO-WIRELESS-EXP-MIB::cwrImageOp
OID (numeric): 1.3.6.1.4.1.9.10.52.1.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object represents the operation to be performed on the identified image. nop(0) - This value will be returned when this object is read. add(1) - Will add the image URL, as the first entry in the image table. delete(2) - Will delete the specified ULR from the image table. move(3) - Will make the image specified by the URL the first entry in the imageTable.
What is cwrImageOp?
This read-write INTEGER (nop, add, delete, move) triggers an operation on the image table: adding a new image URL as the first entry, deleting a specified image by URL, or moving an existing image to the front of the list; reading it always returns nop. It is how an admin manages which firmware images are staged on the device and in what boot priority order, entirely through SNMP writes. For example, setting cwrImageOp to add(1) after supplying an image URL loads a new firmware candidate into the first slot of the image table.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.2.1.1.11 snmpwalk -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrImageOp
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.2.1.1.11.1 snmpget -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrImageOp.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.52.1.2.1.1.11.1 i <value>
Start monitoring Cisco point-to-point wireless radio bridge (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-EXP-MIB::cwrImageOp OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless radio bridge (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.52 | ciscoWirelessExpMIB | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1 | cwrRadioExpMibObjects | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.2 | cwrRadioImageGroup | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.2.1 | cwrImageTable | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.2.1.1 | cwrImageEntry | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.2.1.1.11 | cwrImageOp | CISCO-WIRELESS-EXP-MIB |