All MIBs › CISCO-WIRELESS-EXP-MIB › cwrDuplexorReceivePassband
cwrDuplexorReceivePassband
Module: CISCO-WIRELESS-EXP-MIB
OID (symbolic): CISCO-WIRELESS-EXP-MIB::cwrDuplexorReceivePassband
OID (numeric): 1.3.6.1.4.1.9.10.52.1.4.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates which of the two passbands are being used to receive transmissions. The RF Resource can receive on either of the duplexor passbands. loPassband(1) - The RF Resource is receiving on a frequency within the range identified by cwrDuplexorLoPassbandRange. hiPassband(2) - The RF Resource is receiving on a frequency within the range identified by cwrDuplexorHiPassbandRange.
What is cwrDuplexorReceivePassband?
This read-write INTEGER (loPassband or hiPassband) indicates which of the duplexor's two passbands the RF resource is currently using to receive transmissions. It lets an admin confirm which frequency band a link is actually operating in when the duplexor supports both a low and a high passband. For example, if a link is expected to run in the range described by cwrDuplexorHiPassbandRange but cwrDuplexorReceivePassband reads loPassband, that mismatch points to a misconfiguration worth investigating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.4.1.1.5 snmpwalk -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrDuplexorReceivePassband
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.4.1.1.5.1 snmpget -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrDuplexorReceivePassband.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.52.1.4.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwrDuplexorReceivePassband.1
Start monitoring Cisco point-to-point wireless radio bridge (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-EXP-MIB::cwrDuplexorReceivePassband OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless radio bridge (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.52 | ciscoWirelessExpMIB | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1 | cwrRadioExpMibObjects | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4 | cwrRadioDuplexorGroup | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4.1 | cwrDuplexorTable | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4.1.1 | cwrDuplexorEntry | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4.1.1.5 | cwrDuplexorReceivePassband | CISCO-WIRELESS-EXP-MIB |