All MIBs › CISCO-WIRELESS-EXP-MIB › cwrDuplexorHiPassbandRange
cwrDuplexorHiPassbandRange
Module: CISCO-WIRELESS-EXP-MIB
OID (symbolic): CISCO-WIRELESS-EXP-MIB::cwrDuplexorHiPassbandRange
OID (numeric): 1.3.6.1.4.1.9.10.52.1.4.1.1.4
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: This object represents the high frequency range that this Duplexor will pass through without any attenuation. All high frequencies outside this range will be attenuated to a level such that an RF resource that uses this Duplexor will be unable to transmit or receive those frequencies.
What is cwrDuplexorHiPassbandRange?
This read-write DisplayString states the high-frequency range that the duplexor passes through without attenuation; frequencies outside that range are attenuated enough that the RF resource using this duplexor cannot transmit or receive on them. It tells an admin which upper-band frequencies are actually usable with the currently installed duplexor hardware. For example, before selecting a high-band channel for a link, an admin checks cwrDuplexorHiPassbandRange to confirm the intended frequency will not be attenuated away.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.4.1.1.4 snmpwalk -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrDuplexorHiPassbandRange
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.52.1.4.1.1.4.1 snmpget -v2c -c public <target> CISCO-WIRELESS-EXP-MIB::cwrDuplexorHiPassbandRange.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.52.1.4.1.1.4.1 s <value>
Start monitoring Cisco point-to-point wireless radio bridge (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-EXP-MIB::cwrDuplexorHiPassbandRange OID value, configure state conditions and alerts, and monitor any Cisco point-to-point wireless radio bridge (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.52 | ciscoWirelessExpMIB | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1 | cwrRadioExpMibObjects | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4 | cwrRadioDuplexorGroup | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4.1 | cwrDuplexorTable | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4.1.1 | cwrDuplexorEntry | CISCO-WIRELESS-EXP-MIB |
| 1.3.6.1.4.1.9.10.52.1.4.1.1.4 | cwrDuplexorHiPassbandRange | CISCO-WIRELESS-EXP-MIB |