CISCO-WIRELESS-DOCS-IF-MIB :: cwdIfSigQCorrecteds

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-DOCS-IF-MIBcwdIfSigQCorrecteds

cwdIfSigQCorrecteds

Module: CISCO-WIRELESS-DOCS-IF-MIB

OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfSigQCorrecteds

OID (numeric): 1.3.6.1.4.1.9.9.167.1.1.6.1.3

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device.

What is cwdIfSigQCorrecteds?

This counter tracks the number of codewords received on this channel that contained errors correctable by the receiver's forward error correction, again counting all codewords on the channel regardless of destination. Admins watch this counter because a rising trend, even without actual data loss, signals a degrading RF environment before it becomes bad enough to cause uncorrectable errors. For example, a steadily increasing cwdIfSigQCorrecteds on one channel compared to others could be an early warning of a developing interference or signal-quality issue on that channel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.6.1.3
snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfSigQCorrecteds

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.6.1.3.1
snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfSigQCorrecteds.1

Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfSigQCorrecteds OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.167ciscoWirelessDocsIfMibCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1cwdIfMibObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1cwdIfBaseObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.6cwdIfSignalQualityTableCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.6.1cwdIfSignalQualityEntryCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.6.1.3cwdIfSigQCorrectedsCISCO-WIRELESS-DOCS-IF-MIB