All MIBs › CISCO-WIRELESS-DOCS-IF-MIB › cwdIfHeSuStatusValue
cwdIfHeSuStatusValue
Module: CISCO-WIRELESS-DOCS-IF-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusValue
OID (numeric): 1.3.6.1.4.1.9.9.167.1.3.3.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current subscriber unit connectivity state, as specified in the RF Interface Specification. Returned status information is the SU status as assumed by the HE, and indicates the following events: other(1) Any state other than below. ranging(2) The HE has received an Initial Ranging Request message from the SU, and the ranging process is not yet complete. rangingAborted(3) The HE has sent a Ranging Abort message to the SU. rangingComplete(4) The HE has sent a Ranging Complete message to the SU. ipComplete(5) The HE has received a DHCP reply message and forwarded it to the SU. registrationComplete(6) The HE has sent a Registration Response message to the SU. accessDenied(7) The HE has sent a Registration Aborted message to the SU. The HE only needs to report states it is able to detect.
What is cwdIfHeSuStatusValue?
This read-only object reports the subscriber unit's connectivity state as tracked by the headend, describing progress through events such as ranging received, ranging aborted, or ranging complete, per the RF Interface Specification. Admins use this headend-side view to confirm whether the HE and the SU agree on the device's current connection stage. For example, an SU claiming to be fully connected on its own status object while the headend's cwdIfHeSuStatusValue still shows rangingAborted would reveal a state mismatch worth investigating.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.3.1.8 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusValue
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.3.1.8.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusValue.1
Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusValue OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1 | cwdIfMibObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3 | cwdIfHeObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.3 | cwdIfHeSuStatusTable | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.3.1 | cwdIfHeSuStatusEntry | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.3.1.8 | cwdIfHeSuStatusValue | CISCO-WIRELESS-DOCS-IF-MIB |