All MIBs › CISCO-WIRELESS-DOCS-IF-MIB › cwdIfHeSuStatusIpAddress
cwdIfHeSuStatusIpAddress
Module: CISCO-WIRELESS-DOCS-IF-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusIpAddress
OID (numeric): 1.3.6.1.4.1.9.9.167.1.3.3.1.3
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: IP address of this Subscriber Unit. If the Subscriber Unit has no IP address assigned, or the IP address is unknown, this object returns a value of 0.0.0.0. If the Subscriber Unit has multiple IP addresses, this object returns the IP address associated with the Wireless interface. Each SU has only one wireless MAC interface.
What is cwdIfHeSuStatusIpAddress?
This read-only object reports the IP address of the subscriber unit's wireless interface as seen by the headend, returning 0.0.0.0 if the SU has no IP address assigned or it is unknown. Admins use it to correlate a wireless MAC-layer entry with the corresponding IP-layer identity of the device for further troubleshooting. For example, an admin wanting to ping or traceroute a specific subscriber unit from the network side would read cwdIfHeSuStatusIpAddress to get its current address.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.3.1.3 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusIpAddress
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.3.1.3.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusIpAddress.1
Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeSuStatusIpAddress OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1 | cwdIfMibObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3 | cwdIfHeObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.3 | cwdIfHeSuStatusTable | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.3.1 | cwdIfHeSuStatusEntry | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.3.1.3 | cwdIfHeSuStatusIpAddress | CISCO-WIRELESS-DOCS-IF-MIB |