CISCO-WIRELESS-DOCS-IF-MIB :: cwdIfHeStatusFailedRegReqs

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-DOCS-IF-MIBcwdIfHeStatusFailedRegReqs

cwdIfHeStatusFailedRegReqs

Module: CISCO-WIRELESS-DOCS-IF-MIB

OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeStatusFailedRegReqs

OID (numeric): 1.3.6.1.4.1.9.9.167.1.3.2.1.4

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This object counts failed registration attempts, i.e., authentication failures and class of service failures, on this interface.

What is cwdIfHeStatusFailedRegReqs?

This counter tracks the number of failed registration attempts on this interface, specifically counting authentication failures and class-of-service failures. Admins use this to gauge how often SUs on this interface are being rejected during registration for policy reasons rather than protocol corruption. For example, a spike in cwdIfHeStatusFailedRegReqs shortly after a change to authentication settings would suggest the new configuration is incorrectly rejecting legitimate SUs.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.2.1.4
snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeStatusFailedRegReqs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.2.1.4.1
snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeStatusFailedRegReqs.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwdIfHeStatusFailedRegReqs.1

Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeStatusFailedRegReqs OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.167ciscoWirelessDocsIfMibCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1cwdIfMibObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.3cwdIfHeObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.3.2cwdIfHeStatusTableCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.3.2.1cwdIfHeStatusEntryCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.3.2.1.4cwdIfHeStatusFailedRegReqsCISCO-WIRELESS-DOCS-IF-MIB