All MIBs › CISCO-WIRELESS-DOCS-IF-MIB › cwdIfHeQosProfilePermissions
cwdIfHeQosProfilePermissions
Module: CISCO-WIRELESS-DOCS-IF-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeQosProfilePermissions
OID (numeric): 1.3.6.1.4.1.9.9.167.1.3.6
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: This object specifies permitted methods of creating entries in cwdIfQosProfileTable. CreateByManagement(0) is set if entries can be created using SNMP. UpdateByManagement(1) is set if updating entries using SNMP is permitted. CreateBySubscriberUnits(2) is set if entries can be created based on information in REG-REQ MAC messages received from Subscriber units. Information in this object is only applicable if cwdIfQosProfileTable is implemented as read-create. Otherwise, this object is implemented as read-only and returns CreateBySubscriberUnits(2). Either CreateByManagement(0) or CreateBySubscriberUnits(2) must be set when writing to this object. If this object has a value of createByManagement(2) the qos entries can be created and modified by the management. If this object has a value of UpdateByManagement(1) the qos entries can be updated my management irrespective of who created it. But the management cannot create new entry in the cwdIfQosProfileTable.
What is cwdIfHeQosProfilePermissions?
This read-write bitmask specifies which methods are permitted for creating and updating entries in cwdIfQosProfileTable, including creation or update via SNMP management, and creation automatically based on information in REG-REQ messages from subscriber units. Admins use this to control whether QoS profiles must be centrally managed or can be dynamically created based on what SUs request during registration. For example, an admin wanting tight central control over QoS profiles would clear the createBySubscriberUnits(2) bit in cwdIfHeQosProfilePermissions so no profile can be auto-created from a subscriber's registration request.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.6 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeQosProfilePermissions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.6.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeQosProfilePermissions.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.167.1.3.6.1 s <value>
Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeQosProfilePermissions OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1 | cwdIfMibObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3 | cwdIfHeObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.6 | cwdIfHeQosProfilePermissions | CISCO-WIRELESS-DOCS-IF-MIB |