All MIBs › CISCO-WIRELESS-DOCS-IF-MIB › cwdIfHeInsertionInterval
cwdIfHeInsertionInterval
Module: CISCO-WIRELESS-DOCS-IF-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeInsertionInterval
OID (numeric): 1.3.6.1.4.1.9.9.167.1.3.1.1.5
Node type: OBJECT-TYPE
Type: TimeInterval
Access: read-write
Description: The amount of time between each broadcast station maintenance grant. Broadcast station maintenance grants are used to allow new subscriber units to join the network. Zero indicates that a vendor-specific algorithm is used instead of a fixed time. Maximum amount of time permitted by the DOCSIS specification is 2 seconds.
What is cwdIfHeInsertionInterval?
This read-write value sets the amount of time between broadcast station maintenance grants, which allow new subscriber units to join the network, with a value of zero meaning a vendor-specific algorithm is used instead of a fixed interval, and the DOCSIS specification capping the maximum at 2 seconds. Admins tune this to balance how quickly new SUs can join against how much upstream bandwidth is spent on broadcast maintenance opportunities. For example, a network expecting frequent new SU joins might use a shorter cwdIfHeInsertionInterval to let new devices range in more promptly, at the cost of some upstream capacity.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.1.1.5 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeInsertionInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.3.1.1.5.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeInsertionInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.167.1.3.1.1.5.1 s <value>
Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfHeInsertionInterval OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1 | cwdIfMibObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3 | cwdIfHeObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.1 | cwdIfHeMacTable | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.1.1 | cwdIfHeMacEntry | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.3.1.1.5 | cwdIfHeInsertionInterval | CISCO-WIRELESS-DOCS-IF-MIB |