All MIBs › CISCO-WIRELESS-DOCS-IF-MIB › cwdIfDownChannelModProfileIndex
cwdIfDownChannelModProfileIndex
Module: CISCO-WIRELESS-DOCS-IF-MIB
OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfDownChannelModProfileIndex
OID (numeric): 1.3.6.1.4.1.9.9.167.1.1.2.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: An index into cwdIfModulationTable that describes modulation characteristics of this channel. This object returns 0 if the cwdIfModulationTable does not exist, or there is no corresponding row in that table that describes modulation characteristics of this channel.
What is cwdIfDownChannelModProfileIndex?
This read-write value is an index into cwdIfModulationTable identifying the modulation profile applied to this downstream channel, returning 0 if that table doesn't exist or has no matching row. Admins set this to control which modulation scheme, and therefore which throughput and robustness trade-off, is used on this channel. For example, an admin wanting a downstream channel to use a higher-throughput modulation profile would point cwdIfDownChannelModProfileIndex at the row in cwdIfModulationTable defining that profile.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.2.1.6 snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfDownChannelModProfileIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.2.1.6.1 snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfDownChannelModProfileIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.167.1.1.2.1.6.1 i <value>
Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfDownChannelModProfileIndex OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.167 | ciscoWirelessDocsIfMib | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1 | cwdIfMibObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.1 | cwdIfBaseObjects | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.1.2 | cwdIfDownstreamChannelTable | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.1.2.1 | cwdIfDownstreamChannelEntry | CISCO-WIRELESS-DOCS-IF-MIB |
| 1.3.6.1.4.1.9.9.167.1.1.2.1.6 | cwdIfDownChannelModProfileIndex | CISCO-WIRELESS-DOCS-IF-MIB |