CISCO-WIRELESS-DOCS-IF-MIB :: cwdIfChannelUpWidth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-DOCS-IF-MIBcwdIfChannelUpWidth

cwdIfChannelUpWidth

Module: CISCO-WIRELESS-DOCS-IF-MIB

OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelUpWidth

OID (numeric): 1.3.6.1.4.1.9.9.167.1.1.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The maximum bandwidth that can be used by any upstream channel. The sum of the bandwidths used by all upstream channels created within this channel cannot exceed this value.

What is cwdIfChannelUpWidth?

This read-write value sets the maximum total bandwidth, in kHz, that all upstream channels created within this channel grouping may collectively use. Admins use it as a spectrum budget when provisioning multiple upstream channels so they don't oversubscribe the available RF space. For example, if an admin tries to add another upstream channel whose bandwidth would push the sum past cwdIfChannelUpWidth, that new channel's creation should be rejected or constrained.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.1.1.2
snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelUpWidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.1.1.2.1
snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelUpWidth.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.167.1.1.1.1.2.1 i <value>

Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelUpWidth OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.167ciscoWirelessDocsIfMibCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1cwdIfMibObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1cwdIfBaseObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.1cwdIfChannelTableCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.1.1cwdIfChannelEntryCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.1.1.2cwdIfChannelUpWidthCISCO-WIRELESS-DOCS-IF-MIB