CISCO-WIRELESS-DOCS-IF-MIB :: cwdIfChannelDownWidth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WIRELESS-DOCS-IF-MIBcwdIfChannelDownWidth

cwdIfChannelDownWidth

Module: CISCO-WIRELESS-DOCS-IF-MIB

OID (symbolic): CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelDownWidth

OID (numeric): 1.3.6.1.4.1.9.9.167.1.1.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The maximum bandwidth that can be used by any downstream channel. The sum of the bandwidths used by all downstream channels created within this channel cannot exceed this value.

What is cwdIfChannelDownWidth?

This read-write value sets the maximum total bandwidth, in kHz, available to be shared among all downstream channels created within this channel grouping. Admins use this as the spectrum ceiling when provisioning downstream channels so their combined bandwidth stays within what the hardware and frequency plan can support. For example, an admin planning several downstream channels of varying widths would ensure their sum stays within cwdIfChannelDownWidth before activating them.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.1.1.4
snmpwalk -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelDownWidth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.167.1.1.1.1.4.1
snmpget -v2c -c public <target> CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelDownWidth.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.167.1.1.1.1.4.1 i <value>

Start monitoring Cisco wireless point-to-multipoint broadband access systems (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WIRELESS-DOCS-IF-MIB::cwdIfChannelDownWidth OID value, configure state conditions and alerts, and monitor any Cisco wireless point-to-multipoint broadband access systems (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.167ciscoWirelessDocsIfMibCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1cwdIfMibObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1cwdIfBaseObjectsCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.1cwdIfChannelTableCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.1.1cwdIfChannelEntryCISCO-WIRELESS-DOCS-IF-MIB
1.3.6.1.4.1.9.9.167.1.1.1.1.4cwdIfChannelDownWidthCISCO-WIRELESS-DOCS-IF-MIB