CISCO-WAN-VISM-TONE-PLAN-MIB :: vismFrequency2

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-VISM-TONE-PLAN-MIBvismFrequency2

vismFrequency2

Module: CISCO-WAN-VISM-TONE-PLAN-MIB

OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::vismFrequency2

OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.3.1.1.13

Node type: OBJECT-TYPE

Type: Integer32

Access: read-create

Description: Specifies the 2nd frequency component of the dual frequency to be detected by the DSP. A value of 0 means this is a single frequency. The range of 1 to 279 is not a valid range in the DSP.

What is vismFrequency2?

This read-create Integer32 (0-3800 Hz) specifies the second frequency component of the dual-frequency tone, with a value of 0 meaning the tone is actually a single frequency and the range 1-279 being invalid on the DSP. An admin sets this alongside vismFrequency1 to fully define a dual-tone signal, or leaves it at 0 to configure detection of a single-frequency tone instead. For example, an admin configuring detection of a simple single-tone signal sets vismFrequency2 to 0 while vismFrequency1 carries the one relevant frequency.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.150ciscoWanCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.150.24vismTonePlanGrpMIBCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1vismTonePlanGrpMIBObjectsCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1vismTonePlanCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3vismConfigToneDetectGrpCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3.1vismConfigToneDetectTableCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3.1.1vismConfigToneDetectEntryCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3.1.1.13vismFrequency2CISCO-WAN-VISM-TONE-PLAN-MIB