CISCO-WAN-VISM-TONE-PLAN-MIB :: vismFreqOnCadence

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-VISM-TONE-PLAN-MIBvismFreqOnCadence

vismFreqOnCadence

Module: CISCO-WAN-VISM-TONE-PLAN-MIB

OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::vismFreqOnCadence

OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.3.1.1.14

Node type: OBJECT-TYPE

Type: Integer32

Access: read-create

Description: The On time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOnCadence has to be less than vismMinOnCadence value.

It is measured in units of 10ms.

What is vismFreqOnCadence?

This read-create Integer32 (3-5000 milliseconds, measured in 10ms units) specifies the ON time per cycle of the dual-frequency tone VISM is to detect, and this value must be less than vismMinOnCadence. An admin sets this to match the expected on-time cadence of the specific tone being monitored. For example, an admin configuring detection of a fast-cadence tone sets vismFreqOnCadence to a short value while ensuring it still stays below the configured vismMinOnCadence.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.150ciscoWanCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.150.24vismTonePlanGrpMIBCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1vismTonePlanGrpMIBObjectsCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1vismTonePlanCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3vismConfigToneDetectGrpCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3.1vismConfigToneDetectTableCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3.1.1vismConfigToneDetectEntryCISCO-WAN-VISM-TONE-PLAN-MIB
1.3.6.1.4.1.351.150.24.1.1.3.1.1.14vismFreqOnCadenceCISCO-WAN-VISM-TONE-PLAN-MIB