All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › vismFreqOffCadence
vismFreqOffCadence
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::vismFreqOffCadence
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.3.1.1.15
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description:
The Off time in each cycle of the dual frequency to be detected by the DSP. The vismFreqOffCadence should be lesser than the vismMaxOffCadence value.
It is measured in units of 10ms.
What is vismFreqOffCadence?
This configurable parameter specifies the duration, in 10-millisecond units, that a dual-frequency tone detector waits in its off cycle while searching for specific tones. An operator adjusts this value (between 50 and 5000 ms) to optimize tone detection sensitivity and timing for voice services. The value must be less than the maximum off-cadence threshold to maintain proper tone recognition.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3 | vismConfigToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3.1 | vismConfigToneDetectTable | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1 | vismConfigToneDetectEntry | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.15 | vismFreqOffCadence | CISCO-WAN-VISM-TONE-PLAN-MIB |