All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › vismFreqMaxPower
vismFreqMaxPower
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::vismFreqMaxPower
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.3.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-create
Description: Specifies the maximum frequency power to be used by VISM when detecting a specific dual frequency tone.
Please refer the VISM configuration guide for standard values to be used for this field.
What is vismFreqMaxPower?
This read-create Integer32 (0-30 dB) specifies the maximum frequency power VISM will accept when detecting a specific dual-frequency tone. An admin sets this per the VISM configuration guide's recommended values to bound how loud a tone can be and still be recognized. For example, an admin dealing with an unusually strong tone signal on a trunk might need to raise vismFreqMaxPower so legitimate tones aren't rejected as out of range.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3 | vismConfigToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3.1 | vismConfigToneDetectTable | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1 | vismConfigToneDetectEntry | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.3.1.1.5 | vismFreqMaxPower | CISCO-WAN-VISM-TONE-PLAN-MIB |