All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › tonePlanProvisionFlag
tonePlanProvisionFlag
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::tonePlanProvisionFlag
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.2.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute specifies whether this entry contains predefined Tone Plan configuration information from internal firmware code (object is set to 'builtIn') or if it has been configured with tone plan configuration information that has been downloaded from the PXM (object is set to unused).
Only entries that are provisionable may have their tonePlanEntryStatus MIB object marked as unused in this table. BuiltIn entries may not be marked as unused.
What is tonePlanProvisionFlag?
This read-only enumeration (builtIn or provisionable) indicates whether a tone plan entry came from internal firmware or was configured with tone data downloaded from the PXM, and only provisionable entries may ever have their tonePlanEntryStatus marked unused. An admin uses this to distinguish factory-default tone plans from custom, site-downloaded ones when deciding which entries are safe to remove or replace. For example, an admin trying to free up a tone plan slot checks tonePlanProvisionFlag to confirm the entry is provisionable, since a builtIn entry can't be marked unused.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.2.1.1.3 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::tonePlanProvisionFlag
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.2.1.1.3.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::tonePlanProvisionFlag.1
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::tonePlanProvisionFlag OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.2 | vismTonePlanTableGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.2.1 | vismTonePlanTable | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.2.1.1 | vismTonePlanEntry | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.2.1.1.3 | tonePlanProvisionFlag | CISCO-WAN-VISM-TONE-PLAN-MIB |