All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqTonePowerLevelFloor
seqTonePowerLevelFloor
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqTonePowerLevelFloor
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.10
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Lowest (floor) power level of the sequential frequency tone (absolute value in dBm) used with sequential tone detector on VISM DSP. Range from 0 to 40 (0 to -40dB)
What is seqTonePowerLevelFloor?
This read-write Integer32 (0-40, representing an absolute value in dBm from 0 to -40dB) specifies the lowest power level VISM's sequential tone detector will still accept for a tone segment. An admin sets this floor to filter out background noise or very weak signals from being mistaken for the sequential tone being monitored. For example, an admin dealing with a noisy trunk that triggers false sequential-tone detections would raise seqTonePowerLevelFloor to require a stronger signal before matching.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.10 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqTonePowerLevelFloor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.10.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqTonePowerLevelFloor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.10.1 i <value>
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::seqTonePowerLevelFloor OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.10 | seqTonePowerLevelFloor | CISCO-WAN-VISM-TONE-PLAN-MIB |