All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneNumOfFrequencies
seqToneNumOfFrequencies
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneNumOfFrequencies
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The number of single frequencies which have to be detected by the sequential tone detector command on VISM. The frequencies should specified below (seqToneFrequency1 to seqToneFrequency10). This number should correspond to the non-zero frequency values seqToneFrequency1 to seqToneFrequency10.
What is seqToneNumOfFrequencies?
This read-write Integer32 (1-10) specifies how many single frequencies the sequential tone detector on VISM must look for, corresponding to however many of seqToneFrequency1 through seqToneFrequency10 are set to non-zero values. An admin sets this to match the number of distinct tones defined in the sequence being detected, such as the multi-frequency SIT tone. For example, an admin configuring detection of a four-frequency sequential tone sets seqToneNumOfFrequencies to 4 and populates exactly four of the ten frequency slots.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.1 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneNumOfFrequencies
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.1.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneNumOfFrequencies.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.1.1 i <value>
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneNumOfFrequencies OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.1 | seqToneNumOfFrequencies | CISCO-WAN-VISM-TONE-PLAN-MIB |