All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneGapBetweenEachTone
seqToneGapBetweenEachTone
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneGapBetweenEachTone
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Nominal silence gap duration between each tone in 10ms used with sequential tone detector on VISM DSP.
What is seqToneGapBetweenEachTone?
This read-write Integer32 (1-65534), measured in units of 10 milliseconds, specifies the nominal silence gap expected between each tone in the sequence used by VISM's sequential tone detector. An admin sets this to match the timing pattern of the specific multi-tone signal being detected. For example, an admin configuring a sequence tone whose segments are separated by short pauses sets seqToneGapBetweenEachTone to the matching 10ms count.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.4 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneGapBetweenEachTone
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.4.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneGapBetweenEachTone.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.4.1 i <value>
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneGapBetweenEachTone OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.4 | seqToneGapBetweenEachTone | CISCO-WAN-VISM-TONE-PLAN-MIB |