All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneFrequency4
seqToneFrequency4
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency4
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.14
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: 4th frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
What is seqToneFrequency4?
This read-write Integer32 (280-3800 Hz) specifies the 4th frequency in the sequential tone that VISM's DSP-based sequential tone detector must look for. An admin populates this slot only when the sequence being defined actually has a fourth distinct tone segment, consistent with the count set in seqToneNumOfFrequencies. For example, an admin configuring a four-segment sequential tone sets seqToneFrequency4 to that fourth segment's frequency while leaving seqToneNumOfFrequencies at 4.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.14 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency4
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.14.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency4.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.14.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> seqToneFrequency4.1
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency4 OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.14 | seqToneFrequency4 | CISCO-WAN-VISM-TONE-PLAN-MIB |