All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneFrequency3
seqToneFrequency3
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency3
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.13
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
3rd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
What is seqToneFrequency3?
This OID holds the third audio frequency (in Hz, range 280-3800) that the voice processor listens for when detecting a sequential tone pattern. Sequential tones might signal a phone's answer tone or dial tone. A VoIP engineer sets this when configuring how the gateway detects specific signaling sounds.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.13 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.13.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.13 | seqToneFrequency3 | CISCO-WAN-VISM-TONE-PLAN-MIB |