All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneFrequency2
seqToneFrequency2
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency2
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.12
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: 2nd frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
What is seqToneFrequency2?
This read-write Integer32 (280-3800 Hz) specifies the 2nd frequency in the sequential tone that VISM's DSP-based sequential tone detector must look for. An admin sets this as the second entry in the ordered frequency list defining a specific multi-tone signal, such as one segment of a SIT tone sequence. For example, an admin defining a sequential tone whose second segment is a 620Hz component sets seqToneFrequency2 to 620.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.12 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.12.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.12.1 i <value>
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency2 OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.12 | seqToneFrequency2 | CISCO-WAN-VISM-TONE-PLAN-MIB |