All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneFrequency1
seqToneFrequency1
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency1
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.11
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description:
1st frequency in the SequentialTone to detect (280 - 3800), used with sequential tone detector on VISM DSP.
What is seqToneFrequency1?
This object configures the primary frequency (280 to 3800 Hz) to detect in a sequential tone sequence on VISM DSP cards used for voice gateway applications. Operators set this value when programming tone detectors to recognize specific call progress tones, such as dial tone or busy signals, in VoIP systems.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.11 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.11.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFrequency1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.11.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.11 | seqToneFrequency1 | CISCO-WAN-VISM-TONE-PLAN-MIB |