All MIBs › CISCO-WAN-VISM-TONE-PLAN-MIB › seqToneFreqDeviation
seqToneFreqDeviation
Module: CISCO-WAN-VISM-TONE-PLAN-MIB
OID (symbolic): CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFreqDeviation
OID (numeric): 1.3.6.1.4.1.351.150.24.1.1.4.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Frequency deviation allowed (1 - 1000 Hz) used with sequential tone detector on VISM DSP.
What is seqToneFreqDeviation?
This read-write Integer32 (1-1000 Hz) specifies how much frequency deviation VISM's sequential tone detector will tolerate for each tone in the sequence. An admin adjusts this to control detection tolerance against frequency drift in the incoming multi-tone signal. For example, an admin seeing sequential tone detection fail on a line with slight frequency drift would raise seqToneFreqDeviation to allow more tolerance.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.8 snmpwalk -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFreqDeviation
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.24.1.1.4.8.1 snmpget -v2c -c public <target> CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFreqDeviation.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.150.24.1.1.4.8.1 i <value>
Start monitoring Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-VISM-TONE-PLAN-MIB::seqToneFreqDeviation OID value, configure state conditions and alerts, and monitor any Cisco MGX WAN switches with VISM (Voice Interworking Service Module) cards (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1 | vismTonePlanGrpMIBObjects | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1 | vismTonePlan | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4 | vismSequentialToneDetectGrp | CISCO-WAN-VISM-TONE-PLAN-MIB |
| 1.3.6.1.4.1.351.150.24.1.1.4.8 | seqToneFreqDeviation | CISCO-WAN-VISM-TONE-PLAN-MIB |