CISCO-WAN-RTP-CONN-MIB :: vismRtpICSEnable

MIB Reference — IPNetwork Monitor

All MIBsCISCO-WAN-RTP-CONN-MIBvismRtpICSEnable

vismRtpICSEnable

Module: CISCO-WAN-RTP-CONN-MIB

OID (symbolic): CISCO-WAN-RTP-CONN-MIB::vismRtpICSEnable

OID (numeric): 1.3.6.1.4.1.351.150.20.1.1.1.1.16

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-create

Description:

This attribute is used to enable or disable the ICS(Idle Channel Suppression) for a connection. This can be specified while adding the connection and cannot be modified.

When the ICS is enabled the DSP will look for the idle CAS (ABCD bits) pattern specified in ds0IdleCode in dsx0 MIB. If the idle pattern is present the DSP stops generating voice packets towards network side. By default the ds0IdleCode will be zero unless the user has configured it before adding the cid. If the ds0IdleCode is changed after the connection is added it will have no affect unless the card is reset.

What is vismRtpICSEnable?

This boolean flag enables or disables Idle Channel Suppression for RTP voice connections on a voice gateway. When enabled, the DSP suppresses transmission of voice packets when it detects idle CAS (ABCD signaling) patterns. An operator would enable this on international trunk circuits to conserve bandwidth by not sending packets during call silence.

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.150ciscoWanCISCOWAN-SMI
1.3.6.1.4.1.351.150.20ciscoWanRtpConnMIBCISCO-WAN-RTP-CONN-MIB
1.3.6.1.4.1.351.150.20.1ciscoWanRtpConnMIBObjectsCISCO-WAN-RTP-CONN-MIB
1.3.6.1.4.1.351.150.20.1.1vismRtpConnGrpCISCO-WAN-RTP-CONN-MIB
1.3.6.1.4.1.351.150.20.1.1.1vismRtpConnGrpTableCISCO-WAN-RTP-CONN-MIB
1.3.6.1.4.1.351.150.20.1.1.1.1vismRtpConnGrpEntryCISCO-WAN-RTP-CONN-MIB
1.3.6.1.4.1.351.150.20.1.1.1.1.16vismRtpICSEnableCISCO-WAN-RTP-CONN-MIB