CISCO-WAN-RSRC-PART-MIB :: cwRsrcPartIlmiEstablishConPollIntvl

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WAN-RSRC-PART-MIB › cwRsrcPartIlmiEstablishConPollIntvl

cwRsrcPartIlmiEstablishConPollIntvl

Module: CISCO-WAN-RSRC-PART-MIB

OID (symbolic): CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEstablishConPollIntvl

OID (numeric): 1.3.6.1.4.1.9.9.125.1.1.2.1.5

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity.

What is cwRsrcPartIlmiEstablishConPollIntvl?

This object sets the interval, in seconds, between successive ILMI message transmissions used to detect the establishment of ILMI connectivity on a resource partition. An administrator tunes this interval to control how quickly a newly connecting partition confirms ILMI is up and running with its peer. For example, setting this to 10 would cause the partition to probe for ILMI connectivity every 10 seconds until it is confirmed established.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.125.1.1.2.1.5
snmpwalk -v2c -c public <target> CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEstablishConPollIntvl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.125.1.1.2.1.5.1
snmpget -v2c -c public <target> CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEstablishConPollIntvl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.125.1.1.2.1.5.1 i <value>

Start monitoring Cisco MGX/BPX WAN switching platforms (VSI-controlled ATM, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEstablishConPollIntvl OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX WAN switching platforms (VSI-controlled ATM, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.125ciscoWANRsrcPartMIBCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1ciscoWANRsrcPartMIBObjectsCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1cwRsrcPartConfGrpCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1.2cwRsrcPartIlmiTableCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1.2.1cwRsrcPartIlmiEntryCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1.2.1.5cwRsrcPartIlmiEstablishConPollIntvlCISCO-WAN-RSRC-PART-MIB