CISCO-WAN-RSRC-PART-MIB :: cwRsrcPartIlmiEnabled

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WAN-RSRC-PART-MIB › cwRsrcPartIlmiEnabled

cwRsrcPartIlmiEnabled

Module: CISCO-WAN-RSRC-PART-MIB

OID (symbolic): CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEnabled

OID (numeric): 1.3.6.1.4.1.9.9.125.1.1.2.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: By setting the value of this object to 'true', ILMI signalling is enabled on the resource partition.

What is cwRsrcPartIlmiEnabled?

This object enables Interim Local Management Interface (ILMI) signalling on a resource partition when set to true. An administrator enables ILMI on a partition to allow automatic exchange of ATM interface parameters and connectivity status with the attached device. For example, an administrator connecting a partition to an ATM switch that relies on ILMI for address registration would set this object to true to enable that signalling.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.125.1.1.2.1.1
snmpwalk -v2c -c public <target> CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEnabled

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.125.1.1.2.1.1.1
snmpget -v2c -c public <target> CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEnabled.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.125.1.1.2.1.1.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cwRsrcPartIlmiEnabled.1

Start monitoring Cisco MGX/BPX WAN switching platforms (VSI-controlled ATM, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-RSRC-PART-MIB::cwRsrcPartIlmiEnabled OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX WAN switching platforms (VSI-controlled ATM, legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.125ciscoWANRsrcPartMIBCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1ciscoWANRsrcPartMIBObjectsCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1cwRsrcPartConfGrpCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1.2cwRsrcPartIlmiTableCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1.2.1cwRsrcPartIlmiEntryCISCO-WAN-RSRC-PART-MIB
1.3.6.1.4.1.9.9.125.1.1.2.1.1cwRsrcPartIlmiEnabledCISCO-WAN-RSRC-PART-MIB