CISCO-WAN-NCDP-MIB :: cwnAtmInterfaceVci

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-WAN-NCDP-MIB › cwnAtmInterfaceVci

cwnAtmInterfaceVci

Module: CISCO-WAN-NCDP-MIB

OID (symbolic): CISCO-WAN-NCDP-MIB::cwnAtmInterfaceVci

OID (numeric): 1.3.6.1.4.1.9.9.223.1.5.1.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The Virtual Channel Identifier(VCI) value of the VCC supporting the NCDP entity at this ATM interface.

If the values of 'cwnAtmInterfaceVpi' and 'cwnAtmInterfaceVci' are both equal to zero then the NCDP entity is not supported at this ATM interface.

What is cwnAtmInterfaceVci?

This read-write Integer32, ranging 0 to 65535, sets the Virtual Channel Identifier of the VCC supporting the NCDP entity on this ATM interface, and per the description, if both this object and cwnAtmInterfaceVpi are zero, NCDP isn't supported on that interface. An admin sets this together with the VPI to identify the exact ATM virtual circuit that will carry NCDP protocol traffic on the link. A mismatch between the configured VPI/VCI here and what the far-end device expects would prevent NCDP Hello exchange from working on that interface even if the physical ATM link is otherwise up.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.223.1.5.1.1.4
snmpwalk -v2c -c public <target> CISCO-WAN-NCDP-MIB::cwnAtmInterfaceVci

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.223.1.5.1.1.4.1
snmpget -v2c -c public <target> CISCO-WAN-NCDP-MIB::cwnAtmInterfaceVci.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.223.1.5.1.1.4.1 i <value>

Start monitoring Cisco MGX 8000-series ATM WAN switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-NCDP-MIB::cwnAtmInterfaceVci OID value, configure state conditions and alerts, and monitor any Cisco MGX 8000-series ATM WAN switches (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.223ciscoWanNcdpMIBCISCO-WAN-NCDP-MIB
1.3.6.1.4.1.9.9.223.1cwnMIBObjectsCISCO-WAN-NCDP-MIB
1.3.6.1.4.1.9.9.223.1.5cwnAtmInterfaceCISCO-WAN-NCDP-MIB
1.3.6.1.4.1.9.9.223.1.5.1cwnAtmInterfaceTableCISCO-WAN-NCDP-MIB
1.3.6.1.4.1.9.9.223.1.5.1.1cwnAtmInterfaceEntryCISCO-WAN-NCDP-MIB
1.3.6.1.4.1.9.9.223.1.5.1.1.4cwnAtmInterfaceVciCISCO-WAN-NCDP-MIB