CISCO-WAN-ATM-CONN-STAT-MIB :: cwacsHighEgrRcvCLP1

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-ATM-CONN-STAT-MIBcwacsHighEgrRcvCLP1

cwacsHighEgrRcvCLP1

Module: CISCO-WAN-ATM-CONN-STAT-MIB

OID (symbolic): CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP1

OID (numeric): 1.3.6.1.4.1.351.150.2.1.1.1.1.61

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of valid CLP=1 ATM cells in the egress direction of this Channel PRIOR to the traffic management entity. This counter carries upper 32-bits of cwacsHCEgrRcvCLP1. The lower 32-bits will be present in cwacsEgrRcvCLP1.

What is cwacsHighEgrRcvCLP1?

This is the upper 32 bits of the 64-bit count of egress cells on this channel with CLP set to 1 -- lower-priority, discard-eligible cells -- measured before the traffic management entity acts on them. Together with the low-order cwacsEgrRcvCLP1 or the combined cwacsHCEgrRcvCLP1, it tells an admin how much best-effort/discard-eligible egress traffic is being offered to the channel prior to any shaping, useful for distinguishing traffic-mix issues from downstream discard problems. If a customer reports low-priority data arriving fine but high-priority voice degraded, an admin would check whether this CLP=1 volume is disproportionately large relative to the CLP=0 counters.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.2.1.1.1.1.61
snmpwalk -v2c -c public <target> CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP1

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.2.1.1.1.1.61.1
snmpget -v2c -c public <target> CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP1.1

Start monitoring Cisco MGX/BPX ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP1 OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.150ciscoWanCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.150.2ciscoWanAtmConnStatMIBCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1ciscoWanAtmConnStatMIBObjectsCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1cwacsCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1.1cwacsTableCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1.1.1cwacsEntryCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1.1.1.61cwacsHighEgrRcvCLP1CISCO-WAN-ATM-CONN-STAT-MIB