CISCO-WAN-ATM-CONN-STAT-MIB :: cwacsHighEgrRcvCLP0

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-ATM-CONN-STAT-MIBcwacsHighEgrRcvCLP0

cwacsHighEgrRcvCLP0

Module: CISCO-WAN-ATM-CONN-STAT-MIB

OID (symbolic): CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP0

OID (numeric): 1.3.6.1.4.1.351.150.2.1.1.1.1.60

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: The number of valid CLP=0 ATM cells in the egress direction of this Channel PRIOR to the traffic management entity. This counter carries upper 32-bits of cwacsHCEgrRcvCLP0. The lower 32-bits will be present in cwacsEgrRcvCLP0.

What is cwacsHighEgrRcvCLP0?

This holds the upper 32 bits of the 64-bit count of egress ATM cells on this channel with CLP (Cell Loss Priority) set to 0 -- high-priority, guaranteed-delivery cells -- counted before they reach the traffic management entity. Combined with the low-order cwacsEgrRcvCLP0 or the full cwacsHCEgrRcvCLP0, it gives a management station the volume of high-priority egress traffic entering shaping/policing on this channel without the counter wrapping on a busy trunk. An admin baselining a PVC's outbound load would compare this pre-shaping CLP=0 count against post-shaping counters to see how much of the priority traffic makes it through unmodified.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.150.2.1.1.1.1.60
snmpwalk -v2c -c public <target> CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP0

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.150.2.1.1.1.1.60.1
snmpget -v2c -c public <target> CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP0.1

Start monitoring Cisco MGX/BPX ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-ATM-CONN-STAT-MIB::cwacsHighEgrRcvCLP0 OID value, configure state conditions and alerts, and monitor any Cisco MGX/BPX ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.351stratacomCISCOWAN-SMI
1.3.6.1.4.1.351.150ciscoWanCISCOWAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.351.150.2ciscoWanAtmConnStatMIBCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1ciscoWanAtmConnStatMIBObjectsCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1cwacsCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1.1cwacsTableCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1.1.1cwacsEntryCISCO-WAN-ATM-CONN-STAT-MIB
1.3.6.1.4.1.351.150.2.1.1.1.1.60cwacsHighEgrRcvCLP0CISCO-WAN-ATM-CONN-STAT-MIB