All MIBs › CISCO-WAN-ATM-CONN-MIB › cwaChanReroute
cwaChanReroute
Module: CISCO-WAN-ATM-CONN-MIB
OID (symbolic): CISCO-WAN-ATM-CONN-MIB::cwaChanReroute
OID (numeric): 1.3.6.1.4.1.351.150.1.1.1.1.1.18
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-create
Description:
This is used by the administrator to trigger the re-routing of the connection.
* Rerouting takes effect, when this object is set to true(1). When set to false(2), no action is taken.
* A get on this object always returns false(2).
* When this object is set, no other object other than the RowStatus should be set in the MIB.
* Reroute can be triggered only from the master endpoint. Any attempt to trigger reroute from the slave endpoint would result in a failure of the SET operation.
What is cwaChanReroute?
This OID is a write-only control that triggers the rerouting of an ATM network connection to a backup path (only works from the primary endpoint). Reading it always returns false. A network operator would set this during an emergency to force a connection onto an alternate route when the primary path fails.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150.1 | ciscoWanAtmConnMIB | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1 | cwConnMibObjects | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1 | cwAtmChanCnfg | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1.1 | cwAtmChanCnfgTable | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1.1.1 | cwAtmChanCnfgEntry | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.18 | cwaChanReroute | CISCO-WAN-ATM-CONN-MIB |