All MIBs › CISCO-WAN-ATM-CONN-MIB › cwaChanCDV
cwaChanCDV
Module: CISCO-WAN-ATM-CONN-MIB
OID (symbolic): CISCO-WAN-ATM-CONN-MIB::cwaChanCDV
OID (numeric): 1.3.6.1.4.1.351.150.1.1.1.1.1.24
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-create
Description:
Maximum tolerable cell delay variation in the direction local -> remote.
Setting this parameter to 0xFFFFFF(16777215) indicates to the switch that this parameter does not have significance in SPVC call setup.
This parameter is not allowed to be set on a slave endpoint. (i.e. if 'cwaChanRoutingMastership' is set to 'false').
What is cwaChanCDV?
This object specifies the maximum tolerable cell delay variation (in microseconds) for ATM traffic in the local-to-remote direction on a switched permanent virtual circuit. A network engineer sets this parameter during virtual circuit provisioning to ensure the connection meets quality-of-service requirements for real-time traffic like voice. Setting the value to 0xFFFFFF indicates the parameter is not used in call setup negotiations.
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150 | ciscoWan | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.150.1 | ciscoWanAtmConnMIB | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1 | cwConnMibObjects | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1 | cwAtmChanCnfg | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1.1 | cwAtmChanCnfgTable | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1.1.1 | cwAtmChanCnfgEntry | CISCO-WAN-ATM-CONN-MIB |
| 1.3.6.1.4.1.351.150.1.1.1.1.1.24 | cwaChanCDV | CISCO-WAN-ATM-CONN-MIB |