CISCO-VPC-MIB :: cVpcPeerKeepAliveHoldTimeout

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-VPC-MIB › cVpcPeerKeepAliveHoldTimeout

cVpcPeerKeepAliveHoldTimeout

Module: CISCO-VPC-MIB

OID (symbolic): CISCO-VPC-MIB::cVpcPeerKeepAliveHoldTimeout

OID (numeric): 1.3.6.1.4.1.9.9.807.1.1.1.1.9

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies hold timeout to ignore stale peer alive messages.

What is cVpcPeerKeepAliveHoldTimeout?

This read-write Unsigned32, in seconds, specifies a hold timeout used to ignore stale peer-keepalive messages. Administrators use it to prevent old, delayed keepalive messages from being mistakenly treated as current, which could otherwise mask an actual peer failure. For example, on a congested management network where keepalive packets are occasionally delayed rather than lost, this hold timeout setting helps the device correctly discard outdated messages instead of acting on stale peer status.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.807.1.1.1.1.9
snmpwalk -v2c -c public <target> CISCO-VPC-MIB::cVpcPeerKeepAliveHoldTimeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.807.1.1.1.1.9.1
snmpget -v2c -c public <target> CISCO-VPC-MIB::cVpcPeerKeepAliveHoldTimeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.807.1.1.1.1.9.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cVpcPeerKeepAliveHoldTimeout.1

Start monitoring Cisco Nexus data center switches (Virtual Port Channel) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VPC-MIB::cVpcPeerKeepAliveHoldTimeout OID value, configure state conditions and alerts, and monitor any Cisco Nexus data center switches (Virtual Port Channel) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.807ciscoVpcMIBCISCO-VPC-MIB
1.3.6.1.4.1.9.9.807.1ciscoVpcMIBObjectsCISCO-VPC-MIB
1.3.6.1.4.1.9.9.807.1.1cVpcPeerKeepAliveCISCO-VPC-MIB
1.3.6.1.4.1.9.9.807.1.1.1cVpcPeerKeepAliveConfigTableCISCO-VPC-MIB
1.3.6.1.4.1.9.9.807.1.1.1.1cVpcPeerKeepAliveConfigEntryCISCO-VPC-MIB
1.3.6.1.4.1.9.9.807.1.1.1.1.9cVpcPeerKeepAliveHoldTimeoutCISCO-VPC-MIB