All MIBs › CISCO-VOICE-ATM-DIAL-CONTROL-MIB › cvAtmPeerCfgVADEnable
cvAtmPeerCfgVADEnable
Module: CISCO-VOICE-ATM-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgVADEnable
OID (numeric): 1.3.6.1.4.1.9.10.35.1.3.1.1.11
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether or not VAD (Voice Activity Detection) is enabled. If the object value is 'false', then the voice data is continuously transmitted to ATM backbone.
What is cvAtmPeerCfgVADEnable?
This is a read-write true/false setting that enables or disables Voice Activity Detection for this ATM voice peer. An admin cares about this because with VAD enabled, silence during a call is not transmitted, saving bandwidth on the ATM backbone, whereas disabling it sends voice data continuously even during silent pauses. For example, an admin might disable VAD on peers carrying fax or modem tones, since VAD can accidentally clip audio and interfere with those signals.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.11 snmpwalk -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgVADEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.11.1 snmpget -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgVADEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.11.1 s <value>
Start monitoring Cisco voice gateway with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgVADEnable OID value, configure state conditions and alerts, and monitor any Cisco voice gateway with ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.35 | ciscoVoiceAtmDialControlMIB | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1 | ciscoVoiceAtmDialControlMIBObjects | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3 | cvAtmDialPeer | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1 | cvAtmPeerCfgTable | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1.1 | cvAtmPeerCfgEntry | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1.1.11 | cvAtmPeerCfgVADEnable | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |