All MIBs › CISCO-VOICE-ATM-DIAL-CONTROL-MIB › cvAtmPeerCfgUseSeqNumbers
cvAtmPeerCfgUseSeqNumbers
Module: CISCO-VOICE-ATM-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgUseSeqNumbers
OID (numeric): 1.3.6.1.4.1.9.10.35.1.3.1.1.12
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether or not Sequence Numbers are generated on voice packets.
What is cvAtmPeerCfgUseSeqNumbers?
This is a read-write true/false setting that controls whether the ATM voice peer stamps sequence numbers onto its outgoing voice packets. An admin enables this so the receiving end can detect lost or reordered packets, which is important for diagnosing and correcting jitter or packet-loss issues on the ATM link. For example, an admin experiencing choppy audio might enable this setting so packet-loss statistics become meaningful for troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.12 snmpwalk -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgUseSeqNumbers
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.12.1 snmpget -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgUseSeqNumbers.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.12.1 s <value>
Start monitoring Cisco voice gateway with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgUseSeqNumbers OID value, configure state conditions and alerts, and monitor any Cisco voice gateway with ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.35 | ciscoVoiceAtmDialControlMIB | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1 | ciscoVoiceAtmDialControlMIBObjects | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3 | cvAtmDialPeer | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1 | cvAtmPeerCfgTable | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1.1 | cvAtmPeerCfgEntry | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1.1.12 | cvAtmPeerCfgUseSeqNumbers | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |