CISCO-VOICE-ATM-DIAL-CONTROL-MIB :: cvAtmPeerCfgSessionProtocol

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-VOICE-ATM-DIAL-CONTROL-MIB › cvAtmPeerCfgSessionProtocol

cvAtmPeerCfgSessionProtocol

Module: CISCO-VOICE-ATM-DIAL-CONTROL-MIB

OID (symbolic): CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgSessionProtocol

OID (numeric): 1.3.6.1.4.1.9.10.35.1.3.1.1.1

Node type: OBJECT-TYPE

Type: CvAtmSessionProtocol

Access: read-write

Description: The object specifies the session protocol to be used for Internet call between local and remote router via ATM backbone.

What is cvAtmPeerCfgSessionProtocol?

This is a read-write setting that selects which session protocol a voice dial peer uses to set up calls between the local and a remote router across an ATM backbone. An administrator configuring the ATM voice peer sets this so both ends agree on how call setup signaling is exchanged over the ATM network. For example, changing this value is how an engineer would migrate a peer from one signaling scheme to another when reconfiguring a branch office's ATM voice trunk.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.1
snmpwalk -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgSessionProtocol

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.1.1
snmpget -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgSessionProtocol.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.1.1 s <value>

Start monitoring Cisco voice gateway with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgSessionProtocol OID value, configure state conditions and alerts, and monitor any Cisco voice gateway with ATM interfaces from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.35ciscoVoiceAtmDialControlMIBCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1ciscoVoiceAtmDialControlMIBObjectsCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3cvAtmDialPeerCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1cvAtmPeerCfgTableCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1.1cvAtmPeerCfgEntryCISCO-VOICE-ATM-DIAL-CONTROL-MIB
1.3.6.1.4.1.9.10.35.1.3.1.1.1cvAtmPeerCfgSessionProtocolCISCO-VOICE-ATM-DIAL-CONTROL-MIB