All MIBs › CISCO-VOICE-ATM-DIAL-CONTROL-MIB › cvAtmPeerCfgInterfaceName
cvAtmPeerCfgInterfaceName
Module: CISCO-VOICE-ATM-DIAL-CONTROL-MIB
OID (symbolic): CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgInterfaceName
OID (numeric): 1.3.6.1.4.1.9.10.35.1.3.1.1.2
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-write
Description: The object specifies the ifName on which the call will go out. A zero length string indicates that no interface has been assigned.
What is cvAtmPeerCfgInterfaceName?
This is a read-write text field naming the specific interface, by its ifName, that an ATM voice peer will use to send outgoing calls. An admin sets this to bind a dial peer to a particular physical or logical ATM interface, and an empty string is the tell-tale sign that no interface has been assigned yet. For example, if outbound calls on a peer are failing, checking this object for a zero-length value would immediately reveal that the peer was never wired to an egress interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.2 snmpwalk -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgInterfaceName
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.2.1 snmpget -v2c -c public <target> CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgInterfaceName.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.35.1.3.1.1.2.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cvAtmPeerCfgInterfaceName.1
Start monitoring Cisco voice gateway with ATM interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-VOICE-ATM-DIAL-CONTROL-MIB::cvAtmPeerCfgInterfaceName OID value, configure state conditions and alerts, and monitor any Cisco voice gateway with ATM interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.35 | ciscoVoiceAtmDialControlMIB | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1 | ciscoVoiceAtmDialControlMIBObjects | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3 | cvAtmDialPeer | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1 | cvAtmPeerCfgTable | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1.1 | cvAtmPeerCfgEntry | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |
| 1.3.6.1.4.1.9.10.35.1.3.1.1.2 | cvAtmPeerCfgInterfaceName | CISCO-VOICE-ATM-DIAL-CONTROL-MIB |